The tipping rain gauge conforming to WMO is a standard instrument for monitoring rainfall data in various industries. It can be used for traceability analysis of various applications.
ZDR100 Tipping Bucket Rain Gauge
It is divided into single tipping and double tipping design, with resolution ranging from 0.1 mm to 1 mm, high cost-effective, meeting the requirements of different industries.
| Monitoring Parameters | Rainfall / Rainfall intensity |
|---|---|
| Monitoring Principle | Reed Pulse |
| Resolution | 0.1mm / 0.2mm / 0.5mm / 1mm |
| Material | Plastic / Stainless Steel |
|
What is a Tipping Bucket Rain Gauge?
A tipping bucket rain gauge is one of the most traditional tools used for weather station applications. These rain gauges include a rain-collecting funnel, two carefully calibrated “buckets” mounted on a fulcrum, and an electronic switch.
How does a Tipping Bucket Rain Gauge work?
A tipping bucket rain gauge has several components that allow it to accurately measure rainfall. As rain falls, it lands in the funnel of the tipping bucket rain gauge. … The top bucket is held in place by a magnet until it has filled to the calibrated amount (usually approximately 0.001 inches of rain).
How is rain fall measured?
Most standard rain gauges have a wide funnel leading into the cylinder and are calibrated so that one-tenth of an inch of rain measures one inch when it collects inside. The funnel is 10 times the cross-sectional area of the tube. Rainfall as low as .01 inches can be measured with this instrument.
How average rainfall is calculated?
Annual rainfall is the sum of daily rainfall, that can be calculated from raingauge records. Here, while calculating average annual rainfall one must take the length of period into account. One cannot simply average the 10 years of data to state the average rainfall. It has to be 30-35 years.
How do you calculate rainfall volume?
https://www.zataiot.com/wp-content/uploads/2022/02/Disdrometer-300x189-1.png 189 300 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862023-06-10 07:47:152023-06-26 02:09:38Disdrometer / Distrometer – ZDM100
https://www.zataiot.com/wp-content/uploads/2019/08/ZDR100.png 436 670 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862023-06-10 07:25:122023-06-26 02:09:26ZDR100 Tipping Bucket Rain Gauge
https://www.zataiot.com/wp-content/uploads/2023/04/雪深传感器1.png 436 670 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862023-04-15 04:24:262023-04-15 04:34:45Ultrasonic Snow Depth Sensor ZSU
https://www.zataiot.com/wp-content/uploads/2019/11/outdoor-pic.jpg 1024 768 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862023-06-10 11:37:552023-06-26 02:14:13Outdoor Air Quality Monitor & Sensor Solution
https://www.zataiot.com/wp-content/uploads/2020/12/Lab.jpg 427 640 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862023-06-10 05:25:022023-06-26 02:08:11Temperature Sensor Calibration Knowledge
https://www.zataiot.com/wp-content/uploads/2020/02/COD-Definition.jpeg 435 670 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862022-02-10 13:43:182022-03-20 07:33:50Chemical Oxygen Demand-(COD) Sensor Definition & Method
https://www.zataiot.com/wp-content/uploads/2021/03/Sodar-Wind-Profiler.png 331 618 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862022-02-10 13:40:392022-03-20 08:26:29Sodar Wind Profiler System | ZATA
Disdrometer / Distrometer – ZDM100