ZWQ-IF1 Fluoride Sensor

ZWQ-IF1 Fluoride Sensor can be used to detect the Fluoride value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.

ZWQ-IF1 is an intelligent fluoride sensor using RS485 communication interface and Modbus RTU standard protocol. Corrosion resistant shell, built-in PT1000 temperature sensor and compensation algorithm, no reagent, no secondary pollution, low maintenance cost, suitable for all kinds of harsh working environment.

Monitoring Parameters	Fluoride
Monitoring Principle	Ion Electrode
Power-In	DC12/24V / Solar Power
Interface	RS485/RS232/Wifi/BT/LTE

Request A Quote

Technical Parameter

Model	ZWQ-IF1
Measuring Principle	Ion Electrode
Measure Range	0-1000 mg/L
Measure Resolution	0.01 mg/L
Measure Accuracy	±5%
Interface	RS485（Modbus RTU）
Material	POM
Electrode Cable	3m
Electrode Dimension	D34mm L205mm
Power	DC12/24V

Application

Advantage

Corrosion resistant shell; NPT3/4 upper thread interface, easy to install.
Accurate measurement, low detection limit and small long-term drift.
Built-in PT1000 temperature sensor and compensation algorithm, the accuracy can reach <0.1 C.
Solution grounding function, anti-static interference.
RS485 output, strong anti-clutter and signal interference ability, better data stability.
It has the function of calibration record storage, plug and play, and no calibration is needed for the first use.
Sensor supports hot swap function.

Fluoride Sensors FAQs

What is a Fluoride Sensor in water?

The Fluoride Sensor is a potentiometric sensor working with ion selective electrodes (ISE) and a reference electrode. ZWQ-IF1 Fluoride Sensor can be used to detect the Fluoride value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.