ZWQ-INH1 Ammonia Nitrogen Sensor can be used to detect the ammonia nitrogen value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.
ZWQ-INH1 is an ammonia nitrogen sensor using RS485 communication interface and Modbus RTU standard protocol. It has built-in PT1000 temperature sensor and compensation algorithm. It can replace the ammonia nitrogen intelligent sensor with film head without reagent, secondary pollution and low maintenance cost.
| Monitoring Parameters | Ammonia Nitrogen |
|---|---|
| Monitoring Principle | Ion Electrode |
| Power-In | DC12/24V / Solar Power |
| Interface | RS485/RS232/Wifi/BT/LTE |
| Model | ZWQ-INH1 |
|---|---|
| Measuring Principle | Ion Electrode |
| Measure Range | 0-1000 mg/L |
| Measure Resolution | 0.01 mg/L |
| Measure Accuracy | 10% or 0.1mg/L |
| Interface | RS485（Modbus RTU） |
| Material | POM |
| Electrode Cable | 3m |
| Electrode Dimension | D34mm L205mm |
| Power | DC12/24V |
Toggle 1
Toggle 2
https://www.zataiot.com/wp-content/uploads/2019/08/ZWQ-CT1.png 436 670 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862022-02-10 01:41:272022-03-20 08:18:29ZWQ-ICL Chloride Sensor https://www.zataiot.com/wp-content/uploads/2019/08/ZWQ-CT1.png 436 670 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862022-02-10 01:33:352022-03-20 08:18:52ZWQ-IF1 Fluoride Sensor https://www.zataiot.com/wp-content/uploads/2019/08/ZWQ-CT1.png 436 670 jack000486 https://zataiot.com/wp-content/uploads/2019/03/zataiot.png jack0004862022-02-10 01:13:102022-03-20 08:19:51ZWQ-CHL1 Chlorophyll Sensor
Doppler sodar wind profiler – ZAS | ZATA